ImprintaAISign In →
Free KDP Tool

KDP Book Cover Calculator

Estimate spine width, bleed dimensions, and a full-wrap cover size for a KDP paperback or hardcover. Confirm all dimensions against the current KDP template and previewer before submitting a cover.

Book Specifications

KDP requires a minimum of 24 pages and a maximum of 828 pages for paperbacks.

Cover Dimensions

Spine Width0.2702" (6.86 mm)
Full Wrap Width12.5202" (3756 px @ 300 DPI)
Full Wrap Height9.2500" (2775 px @ 300 DPI)
Front Cover6.1250" × 9.2500"
Front Cover (px)1838 × 2775 px
Bleed (all sides)0.125" (0.125")

Cover Layout Diagram

Back Cover
Spine
Front Cover
← Bleed zone (0.125")
Spine: 0.2702"

How KDP Calculates Spine Width

White paper: Page count × 0.002252"  | Cream paper: Page count × 0.002500"  | Color paper: Page count × 0.002347"

Full wrap width = Back cover width + Spine + Front cover width + (Bleed × 2). Each cover panel = Trim width + 0.125" bleed on the outer edge. Full wrap height = Trim height + (0.125" × 2).

Develop an AI-Assisted Cover Concept

Use ImprintaAI to explore a cover concept, then review image rights, typography, dimensions, and current platform requirements before publishing.

Need the back-cover barcode too? Make a free ISBN barcode with a price add-on.

How the numbers are calculated

A paperback cover is one flat image that wraps around the back, the spine and the front. Its width is the back cover plus the spine plus the front cover plus bleed on the outer edges, and its height is the trim height plus bleed at top and bottom. KDP asks for 0.125 inches of bleed on each outside edge, which is the figure used above. The spine width is the page count multiplied by the thickness of one page, and that thickness depends on the paper: the calculator uses KDP's published per-page figures of 0.002252 inches for white paper and 0.0025 inches for cream.

A worked example

A 6 by 9 inch book with 120 pages on white paper has a spine of about 0.27 inches. The full cover is therefore 0.125 + 6 + 0.27 + 6 + 0.125, or about 12.52 inches wide, and 9.25 inches tall. At 300 DPI, the resolution KDP recommends for print images, that is roughly 3,756 by 2,775 pixels.

Spine text

KDP's help pages say spine text is only allowed on books with more than 79 pages, because thinner spines cannot hold readable text reliably. Leave a margin around spine text so small variations in trimming do not cut it off.

Before you upload

Always download KDP's own cover template for your trim size, page count and paper, and place your design on it to check the safe areas. Keep important text and images at least 0.125 inches inside the trim line. Then use the online previewer and, ideally, order a proof copy. Printing tolerances mean a small shift can occur, so designs that run text right to the edge are risky.

Hardcovers

Case laminate hardcovers use different wrap and hinge allowances, so confirm hardcover dimensions with the KDP template rather than relying on paperback rules.

Color and file settings

Save print covers as PDFs, flatten transparency, and embed fonts. KDP prints in CMYK, so bright on-screen RGB colors may print slightly duller; check the proof copy before ordering stock.